One of the most promising current applications of nanotechnology to medicine is the use of nanoparticles to specifically target drug therapy to cancer cells. A variety of different types of nanoparticles using different drug delivery strategies are being investigated, including one type using biopolymers that we described here last week. Another report shows that a very different type of nanoparticle, composed of gold, works by delivering a drug directly to the nucleus of cancer cells. A hat tip to ScienceDaily for reprinting this news release from Northwestern University written by Megan Fellman “ Tiny hitchhikers attack cancer cells: Gold nanostars first to deliver drug directly to cancer cell nucleus “: Nanotechnology offers powerful new possibilities for targeted cancer therapies, but the design challenges are many. Northwestern University scientists now are the first to develop a simple but specialized nanoparticle that can deliver a drug directly to a cancer cell’s nucleus — an important feature for effective treatment. They also are the first to directly image at nanoscale dimensions how nanoparticles interact with a cancer cell’s nucleus. “Our drug-loaded gold nanostars are tiny hitchhikers,” said Teri W. Odom, who led the study of human cervical and ovarian cancer cells. “They are attracted to a protein on the cancer cell’s surface that conveniently shuttles the nanostars to the cell’s nucleus. Then, on the nucleus’ doorstep, the nanostars release the drug, which continues into the nucleus to do its work.” … Using electron microscopy, Odom and her team found their drug-loaded nanoparticles dramatically change the shape of the cancer cell nucleus. What begins as a nice, smooth ellipsoid becomes an uneven shape with deep folds. They also discovered that this change in shape after drug release was connected to cells dying and the cell population becoming less viable — both positive outcomes when dealing with cancer cells. The results are published in the journal ACS Nano [ abstract ]. Since this initial research, the researchers have gone on to study effects of the drug-loaded gold nanostars on 12 other human cancer cell lines. The effect was much the same. “All cancer cells seem to respond similarly,” Odom said. “This suggests that the shuttling capabilities of the nucleolin protein for functionalized nanoparticles could be a general strategy for nuclear-targeted drug delivery.” The nanoparticle is simple and cleverly designed. It is made of gold and shaped much like a star, with five to 10 points. (A nanostar is approximately 25 nanometers wide.) The large surface area allows the researchers to load a high concentration of drug molecules onto the nanostar. Less drug would be needed than current therapeutic approaches using free molecules because the drug is stabilized on the surface of the nanoparticle. The drug used in the study is a single-stranded DNA aptamer called AS1411. Approximately 1,000 of these strands are attached to each nanostar’s surface. The DNA aptamer serves two functions: it is attracted to and binds to nucleolin, a protein overexpressed in cancer cells and found on the cell surface (as well as within the cell). And when released from the nanostar, the DNA aptamer also acts as the drug itself. Bound to the nucleolin, the drug-loaded gold nanostars take advantage of the protein’s role as a shuttle within the cell and hitchhike their way to the cell nucleus. The researchers then direct ultrafast pulses of light — similar to that used in LASIK surgery — at the cells. The pulsed light cleaves the bond attachments between the gold surface and the thiolated DNA aptamers, which then can enter the nucleus. In addition to allowing a large amount of drug to be loaded, the nanostar’s shape also helps concentrate the light at the points, facilitating drug release in those areas. Drug release from nanoparticles is a difficult problem, Odom said, but with the gold nanostars the release occurs easily. That the gold nanostar can deliver the drug without needing to pass through the nuclear membrane means the nanoparticle is not required to be a certain size, offering design flexibility. Also, the nanostars are made using a biocompatible synthesis, which is unusual for nanoparticles. Odom envisions the drug-delivery method, once optimized, could be particularly useful in cases where tumors are fairly close to the skin’s surface, such as skin and some breast cancers. (The light source would be external to the body.) Surgeons removing cancerous tumors also might find the gold nanostars useful for eradicating any stray cancer cells in surrounding tissue. A particular advantage of these nanostars is that the plasmonic electrons produced on the surface of the nanostars by the laser solves the problem of how to efficiently discharge the drug target from the nanoparticle vehicle. —James Lewis, PhD
Posts Tagged ‘Surface’
Vertical ZnO nanowire growth on metal substrates
Vertical growth of ZnO nanowires is usually achieved on lattice-matched substrates such as ZnO or sapphire using various vapor transport techniques. Accomplishing this on silicon substrates requires thick ZnO buffer layers. Here we demonstrate growth of vertical ZnO nanowires on FeCrAl substrates. The pre-annealing prior to growth appears to preferentially segregate Al and O to the surface, thus leading to a self-forming, thin pseudo-buffer layer, which then results in vertical nanowire growth as on sapphire substrates. Metal substrates are more suitable and cheaper than others for applications in piezoelectric devices, and thin self-forming layers can also reduce interfacial resistance to electrical and thermal conduction.
Synthesis of silver nanoparticle using D. carota extract
Biosynthesis of silver nanoparticles (NPs) using D. carota extract was investigated for various concentrations of D. carota extract. The aqueous silver ions were reduced into silver NPs when they interacted with D. carota extract. The silver NPs were characterized by UV-visible spectroscopy, Fourier transform infrared spectroscopy (FTIR), x-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements. XRD measurements show that the average size of silver NPs was 20 nm. UV-visible spectra show that the surface plasmon resonance peak of silver is observed at 415 nm. FTIR measurements indicate the presence in D. carota extract of ascorbic acid which is responsible for reducing and capping bioreduced silver NPs. TEM measurement shows that most silver NPs are spherical in shape.
Nanostructured adhesive can hold up to 700 pounds on glass
Photo and description courtesy of UMass Amherst “A card-sized pad of Geckskin can firmly attach very heavy objects such as this 42-inch television weighing about 40 lbs. (18 kg) to a smooth vertical surface. The key innovation by Bartlett and colleagues was to create a soft pad woven into a stiff fabric that includes a synthetic tendon. Together these features allow the stiff yet flexible pad to “drape” over a surface to maximize contact.” Another example of current nanotechnology too cool to ignore is provided by a card-sized adhesive that can support up to 700 pounds on a glass surface, be easily released, and reused many times. A hat tip to ScienceDaily for reprinting this UMass Amherst news release “ Inspired by gecko feet, UMass Amherst scientists invent super-adhesive material “: For years, biologists have been amazed by the power of gecko feet, which let these 5-ounce lizards produce an adhesive force roughly equivalent to carrying nine pounds up a wall without slipping. Now, a team of polymer scientists and a biologist at the University of Massachusetts Amherst have discovered exactly how the gecko does it, leading them to invent “Geckskin,” a device that can hold 700 pounds on a smooth wall. Doctoral candidate Michael Bartlett in Alfred Crosby’s polymer science and engineering lab at UMass Amherst is the lead author of their article describing the discovery in the current online issue of Advanced Materials [ abstract ]. The group includes biologist Duncan Irschick, a functional morphologist who has studied the gecko’s climbing and clinging abilities for over 20 years. Geckos are equally at home on vertical, slanted, even backward-tilting surfaces. “Amazingly, gecko feet can be applied and disengaged with ease, and with no sticky residue remaining on the surface,” Irschick says. These properties, high-capacity, reversibility and dry adhesion offer a tantalizing possibility for synthetic materials that can easily attach and detach heavy everyday objects such as televisions or computers to walls, as well as medical and industrial applications, among others, he and Crosby say. This combination of properties at these scales has never been achieved before, the authors point out. Crosby says, “Our Geckskin device is about 16 inches square, about the size of an index card, and can hold a maximum force of about 700 pounds while adhering to a smooth surface such as glass.” Beyond its impressive sticking ability, the device can be released with negligible effort and reused many times with no loss of effectiveness. For example, it can be used to stick a 42-inch television to a wall, released with a gentle tug and restuck to another surface as many times as needed, leaving no residue. Previous efforts to synthesize the tremendous adhesive power of gecko feet and pads were based on the qualities of microscopic hairs on their toes called setae, but efforts to translate them to larger scales were unsuccessful, in part because the complexity of the entire gecko foot was not taken into account. As Irschick explains, a gecko’s foot has several interacting elements, including tendons, bones and skin, that work together to produce easily reversible adhesion. Now he, Bartlett, Crosby and the rest of the UMass Amherst team have unlocked the simple yet elegant secret of how it’s done, to create a device that can handle excessively large weights. Geckskin and its supporting theory demonstrate that setae are not required for gecko-like performance, Crosby points out. “It’s a concept that has not been considered in other design strategies and one that may open up new research avenues in gecko-like adhesion in the future.” The key innovation by Bartlett and colleagues was to create an integrated adhesive with a soft pad woven into a stiff fabric, which allows the pad to “drape” over a surface to maximize contact. Further, as in natural gecko feet, the skin is woven into a synthetic “tendon,” yielding a design that plays a key role in maintaining stiffness and rotational freedom, the researchers explain. Importantly, the Geckskin’s adhesive pad uses simple everyday materials such as polydimethylsiloxane (PDMS), which holds promise for developing an inexpensive, strong and durable dry adhesive. An amazing example of how controlling structure at the nanometer scale can provide very substantial forces at the macroscopic scale. —James Lewis, PhD
Platinum-nanoparticle-supported core–shell polymer nanospheres with unexpected water stability and facile further modification
Core–shell nanospheres (CSNSs) with hydrophobic cores and hydrophilic shells were fabricated via a simple mini-emulsion polymerization for the stabilization of platinum nanoparticles (Pt-NPs). The CSNSs showed extremely high loading capacity of Pt-NPs (the largest loading amount of the Pt-NPs was about 49.2 wt%). Importantly, the Pt-NPs/CSNSs nanocomposites had unexpected stability in aqueous solution. DLS results revealed that the CSNSs loaded with Pt-NPs exhibited almost no aggregation after standing for a long time . However, the Pt-NPs immobilized on the CSNSs were not straitlaced: they could transport and redistribute between CSNSs freely when the environmental temperature was higher than the melting point of the CSNS shell. Owing to their excellent stability in aqueous solution, the surface of the Pt-NPs/CSNSs nanocomposites could be further decorated easily. For example, polyaniline (PANI)-coated Pt-NPs/CSNSs, nickel (Ni)-coated Pt-NPs/CSNSs and PANI/Pt-NPs dual-layer holl…
Defect-driven synthesis of self-assembled single crystal titanium nanowires via electrochemistry
One-dimensional single crystal nanostructures have garnered much attention, from their low-dimensional physics to their technological uses, due to their unique properties and potential applications, from sensors to interconnects. There is an increasing interest in metallic titanium nanowires, yet their single crystal form has not been actualized. Vapor–liquid–solid (VLS) and template-assisted top-down methods are common means for nanowire synthesis; however, each has limitations with respect to nanowire composition and crystallinity. Here we show a simple electrochemical method to generate single crystal titanium nanowires on monocrystalline NiTi substrates. This work is a significant advance in addressing the challenge of growing single crystal titanium nanowires, which had been precluded by titanium’s reactivity. Nanowires grew non-parallel to the surface and in a periodic arrangement along specific substrate directions; this behavior is attributed to a defect-driven mechanism….
Fabrication and optical characterization of light trapping silicon nanopore and nanoscrew devices
We have fabricated nanotextured Si substrates that exhibit controllable optical reflection intensities and colors. Si nanopore has a photon trapping nanostructure but has abrupt changes in the index of refraction displaying a darkened specular reflection. Nanoscrew Si shows graded refractive-index photon trapping structures that enable diffuse reflection to be as low as 2.2% over the visible wavelengths. By tuning the 3D nanoscale silicon structure, the optical reflection peak wavelength and intensity are changed in the wavelength range of 300–800 nm, making the surface have different reflectivity and apparent colors. The relation between the surface optical properties with the spatial features of the photon trapping nanostructures is examined. Integration of photon trapping structures with planar Si structure on the same substrate is also demonstrated. The tunable photon trapping silicon structures have potential applications in enhancing the performance of semiconductor photoel…
Fabrication of high performance surface enhanced Raman scattering substrates by a solid-state ionics method
Silver nanostructures were prepared by a solid-state ionics method using fast ionic conductor RbAg 4 I 5 films under a direct current electric field (DCEF). The surface morphology of the silver nanostructures grown under different constant current fields was characterized by scanning electron microscopy (SEM). Rhodamine 6G (R6G) aqueous solutions were used as probe molecules to detect the Raman enhancement performance of the silver nanostructure substrates. The effect of external electric field current intensity on the surface morphology of the silver nanostructures during the preparation was studied in detail. The enhancement effect of the silver nanostructure surface enhanced Raman scattering (SERS) substrates with different surface morphologies toward R6G was determined. We found that disordered silver nanowires (DSNW), ordered silver nanowires (OSNW), densely arranged silver nanobamboo arrays (SNBA) and compactly arranged silver nanobud clusters (SNBC) were…
Portable cholesterol detection with polyaniline-carbon nanotube film based interdigitated electrodes
Polyaniline-carboxylic multiwalled carbon nanotubes composite film (PANi-MWCNT) has been polymerized on the surface of interdigitated platinum electrode (fabricated by MEMS technology) which was compatibly connected to Autolab interface via universal serial bus (USB). An amperometric biosensor based on covalent immobilization of cholesterol oxidase (ChOx) on PANi–MWCNT film with potassium ferricyanide (FeCN) as the redox mediator was developed. The mediator helps to shuttle the electrons between the immobilized ChOx and the PANi-MWCNT electrode, therefore operating at a low potential of −0.3 V compared to the saturated calomel electrode (SCE). This potential precludes the interfering compounds from oxidization. The bio-electrode exhibits good linearity from 0.02 to 1.2 mM cholesterol concentration with a correlation coefficient of 0.9985.



Posted in
Tags: